Considering the importance of clean water to healthy living, there’s the need to keep household water clean for the benefit of every member of the home, and water filtration is a very efficient way to achieve this. While a lot has been said in the past about the numerous benefits of filtering water, it is still common to hear people ask the question “are whole house water filters worth it?”

A whole house water filter does the job of filtering water from the main point water enters into the house. Doing this ensures that water that comes out of every tap, shower head, or faucet in your home is filtered and clean. In this article, we cover some of the benefits, costs, and maintenance of whole house water filters to see if they are worth installing or not.

What Are The Benefits When You Filter Your Whole House Water Supply?

Are Whole House Water Filters Worth It? Know The Truth

A whole house water supply has become a necessity for most homes. It is commonly considered a good investment due to the many benefits it offers. These include:

  • Guaranteed safe water and peace of mind: You enjoy drinking safe water at all times, free from contamination and chemicals, and you are 100 percent certain that the water filtration system can take out chemical contaminants like chlorine, lead, and other heavy metals that may be present in the water supply. This makes installing a whole house water supply a good investment for your health.
  • Improved taste and smell of water: The water line in your home becomes cleaner, and as expected the taste is a lot better when it is filtered.
  • Reduced plumbing issues: You will automatically save yourself from having to fix plumbing issues every now and then. Your plumbing appliances will last longer, and cleaning them becomes easier, since the water dispensed through all the water lines has been filtered from chemical substances that leave unwanted sediment after a long time.
  • Environmentally friendly: There won’t be a need to buy numerous water bottles or plastic filters when you have clean potable water in your home.
  • Easy installation: As hard as it might sound, installing a whole house water filtration system is an easy task. The installation is only at one spot within your water supply system. This also makes maintenance quite easy.

How Much Does A Whole House Water Filter Cost

The average cost to install a whole house water filtration ranges from about $500 for under the sink units to $5,000 for higher-end whole house units. Commercial grade systems can cost as high as $14,000. This cost includes; an initial water test which should be carried out by a local contractor or by using a home kit. This must be done to determine the type of water system you need among other things. How much you pay as an overall cost for your water filter system depends on various factors including, the type of unit you buy, size or capacity, cost of installation, cost of maintenance among other factors.

How To Replace A Whole House Water System Filter

The whole house water filter system is typically designed in a way that individuals can easily change the cartridge when it becomes due for a change. Signs like an unpleasant smell, tasty water, and accumulation of dirt that causes poor water flow will be requiring you to have to change the cartridge to get better filtration and cleaner water. This is a step by step approach to replacing a water filter cartridge:

#Step one: Turn off your water supply, this is to ensure there’s no flow of water when you are working

#Step two: Loosen the cartridge with the wrench that came with it and discard it properly. Take out the O-ring as well and clean it

#Step 3: Wash the housing from which the cartridge was taken out with warm water with a little drop of bleach, and give a little scrub to remove sediments. Give the O-ring a quick clean with a cloth and set to one side. Make sure you leave it in a safe place, as O-rings are easy to lose. Discard the used cartridge appropriately.

#Step 4: Lubricate the O-ring and with a little silicone grease, then return it to the right position in its housing, it should be fitted well for proper sealing.

#Step 5: Put a new cartridge in place of the old one. This might be a little technical but still very intuitive. When you are through with this, screw the housing with your hand, but it shouldn’t be too tight. You can now turn your water back on and check for leaks. Ensure that the water is running throughout the house properly again. 

How To Maintain Your Whole House Water Filter System

The way to maintain your filter system is to regularly replace the cartridge and filter and be alert to the changes with your water and the flow. Preventative maintenance on your pre-filter will save you time, money, and headaches if done regularly. In most applications, it is best practice to change filters every 3-6 months. If the water pressure decreases throughout your home, this can result to dirt in the filter and needs to be changed.

We recommend some of the top rated best water filter systems for whole house use below:
  • iSpring RCC7AK
  • Express 3 Stage Home Water Filtration System
  • APEC 6-Stage Ultra Reverse Osmosis Drinking Water Filter System
  • Frizzlife Water Filtration System – RO Reverse Osmosis
  • KFLOW Countertop Reverse Osmosis System, 4-Stage

Are Whole House Water Filters Worth It?

From the various points we have considered, it is easy to see that there are several benefits of installing a whole house water filtration in comparison to buying your pure bottled water or drinking from smaller units installed around the house rather than a unit built directly into your water system. The convenience and health benefits of installing a water filter are obvious since you get to eliminate potentially dangerous contaminants from the water. It is also cheaper in the long run and great for the environment as well. So are whole house water filters worth it? Absolutely! You should consider installing one.